CSI MasterFormat 2018 section 10 28 13 is titled Toilet Accessories. It sits in group 10 28 00, Toilet, Bath, and Laundry Accessories, inside Division 10 Specialties. A specification in this section names the dispensers, disposals, grab bars, mirrors, hooks, shelves, and hand dryers in a restroom, and the submittal proves each one meets the specification.
Section 10 28 13 splits at the fourth level: 10 28 13.13 is Commercial Toilet Accessories and 10 28 13.19 is Healthcare Toilet Accessories. Shower seats, curtain rods, and towel bars are in the next section, 10 28 16 Bath Accessories, and mop holders and utility shelves are in 10 28 26 Hygiene and Custodial Accessories. The Division 10 CSI codes guide lists every number with its source.
What the specification has to decide
Each of these changes the product that satisfies the section, so each belongs in the specification or the schedule:
- Products and basis of design. Name the manufacturer and model for each item, and say whether equals are accepted. Our Bobrick vs ASI vs Bradley guide compares the three lines most specifications name.
- Material and finish. Stainless steel with a satin finish is what most listed accessories use; bright polished, matte black, chrome, and other finishes are listed per model. State the finish by name, because a model that comes in two finishes has two part numbers.
- Mounting. Surface mounted, recessed, or semi-recessed changes the wall: a recessed unit needs a cavity of the published depth before the wall closes. See surface vs recessed accessories.
- Operation. Manual or automatic dispensing, battery or hard-wired power, and key or keyless locks.
- Accessibility. Cite the 2010 ADA Standards section for each mounted item. The ADA mounting height chart gives each fixture's rule with its section number and a verbatim quote.
- Quantities and locations. A schedule by room is easier to check than a paragraph. The restroom accessory schedule builder turns fixture counts into a priced schedule with the ADA references attached, which you can send to us for a quote.
What goes in the submittal
A submittal for 10 28 13 usually collects, for every item, the manufacturer's product data sheet, the finish and mounting called out, and the accessibility reference. Most products on SupplyGopher list a spec sheet on the product page, and many list the maker's CSI guide specification, the three-part text a specifier can paste into a project specification. Each product page also shows its CSI section where the section is settled, so the schedule and the specification use the same number.
Not every item belongs in 10 28 13. Partitions are 10 21 13, lockers are 10 51 13 and the sections after it, and fire protection cabinets are 10 44 13. A restroom package often spans several sections, which is why the Division 10 package page lists them together.
Next step
Browse washroom accessories for models with spec sheets, build a schedule at /build, or request a quote with your schedule or plans and we reply within one business day.
Shop Toilet Partitions & Restroom Accessories
The right partition and accessories for every commercial restroom, built to spec and shipped fast.
Browse Toilet Partitions & Restroom Accessories