ASI Toilet Tissue Dispensers

ASI toilet tissue dispensers run from a basic surface-mounted roll holder to a partition unit that serves two stalls. The Hide-A-Roll models are all twin roll dispensers. The recessed 0031 takes two rolls up to 5-1/4 in., and the partition-mounted 0032 holds four rolls for two compartments. For heavy traffic, the 0039 low profile and 0040 twin dispensers take 9 in. jumbo rolls. Single and double holders come in bright or satin stainless steel, chrome plated finishes, or zamak. Roval 20030 and 20031 carry the Hide-A-Roll design into surface and semi-recessed mounting.

In the accessible compartment, ADA 604.7 decides placement. The dispenser centerline sits 7 to 9 in. in front of the water closet. Its outlet stays 15 to 48 in. above the floor, never behind a grab bar. The same section rules out dispensers that control delivery, so the 0263-1 and 0264-1 controlled delivery holders should stay out of that compartment. For schools and public buildings, the R-009 theft-resistant spindle is an optional add-on, and hooded holders such as the 7314-H cover the roll. An ADA compliant listing, which many ASI dispensers carry, does not replace correct placement.